DynamixShield is a shield for the Arduino Due or Mega that adds the ability to control Dynamixel servos. It also has numerous Grove connectors, along with 3-pin connectors for controlling standard servos and perform analog to digital conversion.
Strategies for reducing the cost of the Jetduino, and what impacts that will have. Description of the different board options, and estimated prices.
[Read the rest of this article...]
Description of the Jetduion V0.2 test results and future plans.
Describes how to control standard servos on the Jetson TK1 using the Jetduino. A YouTube video is included that show how to do this step-by-step.
Describes how to setup the Jetduino for the Jetson TK1. Then shows how to access digital I/O lines for both the Arduino Due and the Jetson's GPIO. YouTube videos are included that show how to do this step-by-step.
Description of the Jetduino V0.2 that was just ordered. This update fixes a number of the problems found in the first version.
Showing the first Jetduino being built, a description of the initial test results, and a list of modifications for version 2 of the Jetduino.
I ordered the Jetduino prototype boards today! I should be able to start building them soon.
The DynamixShield campaign launched!
Please subscribe to my Newsletter!
NeuroRobotic Technologies is dedicated to creating the next generation of intelligent, adaptive robotic systems by building autonomous controls systems that mimic the brains of real animals.